REV. 0

AD8200

–3–

ABSOLUTE MAXIMUM RATINGS

*

Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.5 V

Transient Input Voltage (300 ms) . . . . . . . . . . . . . . . . . . 44 V

Continuous Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . 35 V

Reversed Supply Voltage Protection . . . . . . . . . . . . . . . 0.3 V

Operating Temperature . . . . . . . . . . . (Die) –40

°C to +150°C

. . . . . . . . . (SOIC) –40

°C to +125°C

Storage Temperature . . . . . . . . . . . . . . . . . . –65

°C to +150°C

Output Short Circuit Duration . . . . . . . . . . . . . . . . Indefinite

Lead Temperature Range (Soldering 60 sec) . . . . . . . . 300

°C

*Stresses beyond those listed under Absolute Maximum Ratings may cause

permanent damage to the device. This is a stress rating only; the functional

operation of the device at these or any other conditions above those indicated in

the operational sections of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect device reliability.

ORDERING GUIDE

Model

Temperature Range

Package Description

Package Option

AD8200R

–40

°C to +125°C

Plastic SOIC

SO-8

AD8200CHIPS

–40

°C to +150°C

DIE Form

PIN CONFIGURATION

TOP VIEW

(Not to Scale)

8

7

6

5

1

2

3

4

NC = NO CONNECT

–IN

GND

A1

A2

+IN

NC

OUT

AD8200

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection. Although

the AD8200 features proprietary ESD protection circuitry, permanent damage may occur on

devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are

recommended to avoid performance degradation or loss of functionality.

WARNING!

ESD SENSITIVE DEVICE

METALLIZATION PHOTOGRAPH

+IN

–IN

1

8

GND

2

A1

3

6

OUT

5

A2

4