| Electronic Components Datasheet Search |
|
STM32F407IG Datasheet(PDF) 73 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F407IG Datasheet(HTML) 73 Page - STMicroelectronics |
|
73 / 180 page ![]() STM32F405xx, STM32F407xx Electrical characteristics Doc ID 022152 Rev 3 73/180 Table 14. Limitations depending on the operating power supply range Operating power supply range ADC operation Maximum Flash memory access frequency (fFlashmax) Number of wait states at maximum CPU frequency(1) I/O operation Maximum FSMC_CLK frequency for synchronous accesses Possible Flash memory operations VDD =1.8 to 2.1 V(2) Conversion time up to 1.2 Msps 16 MHz with no Flash memory wait state(3) 7(3)(4) – Degraded speed performance – No I/O compensation up to 30 MHz 8-bit erase and program operations only VDD = 2.1 to 2.4 V Conversion time up to 1.2 Msps 18 MHz with no Flash memory wait state 7(4) – Degraded speed performance – No I/O compensation up to 30 MHz 16-bit erase and program operations VDD = 2.4 to 2.7 V Conversion time up to 2.4 Msps 24 MHz with no Flash memory wait state 6(4) – Degraded speed performance – I/O compensation works up to 48 MHz 16-bit erase and program operations VDD = 2.7 to 3.6 V(5) Conversion time up to 2.4 Msps 30 MHz with no Flash memory wait state 5(4) – Full-speed operation – I/O compensation works –up to 60 MHz when VDD = 3.0 to 3.6 V –up to 48 MHz when VDD = 2.7 to 3.0 V 32-bit erase and program operations 1. The number of wait states can be reduced by reducing the CPU frequency. 2. If an inverted reset signal is applied to PDR_ON, this value can be lowered to 1.7 V when the device operates in a reduced temperature range (0 to 70 °C). 3. Prefetch is not available. Refer to AN3430 application note for details on how to adjust performance and power. 4. Thanks to the ART accelerator and the 128-bit Flash memory, the number of wait states given here does not impact the execution speed from Flash memory since the ART accelerator allows to achieve a performance equivalent to 0 wait state program execution. 5. The voltage range for OTG USB FS can drop down to 2.7 V. However it is degraded between 2.7 and 3 V. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |