ADG465 datasheet(3/8 Pages) AD

3 / 8 page

ADG465

–3–

REV. A

ABSOLUTE MAXIMUM RATINGS

(TA = +25°C unless otherwise noted)

VDD to VSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +44 V

VS, VD, Analog Input Overvoltage with Power ON

. . . . . . . . . . . . . . . . . . . . . . . . . VSS – 20 V to VDD + 20 V

VS, VD, Analog Input Overvoltage with Power OFF

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –35 V to +35 V

Continuous Current, S or D . . . . . . . . . . . . . . . . . . . . . 20 mA

Peak Current, S or D . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA

(Pulsed at 1 ms, 10% Duty Cycle Max)

Operating Temperature Range

Industrial (B Version) . . . . . . . . . . . . . . . . –40

°C to +85°C

Storage Temperature Range . . . . . . . . . . . . –65

°C to +125°C

Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . +150

°C

SOT-23 Package

JA, Thermal Impedance

. . . . . . . . . . . . . . . . . . . 230

°C/W

µSOIC Package

JA, Thermal Impedance

. . . . . . . . . . . . . . . . . . . 205

°C/W

Lead Temperature, Soldering

Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . +215

°C

Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . +220

°C

NOTES

1Stresses above those listed under Absolute Maximum Ratings may cause perma-

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those listed in the operational

sections of this specification is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability. Only one absolute

maximum rating may be applied at any one time.

2Overvoltages at S or D will be clamped by the channel protector, see Circuit

Information section of the data sheet.

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection.

Although the ADG465 features proprietary ESD protection circuitry, permanent damage may

occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD

precautions are recommended to avoid performance degradation or loss of functionality.

ORDERING GUIDE

Model

Temperature Range

Package Descriptions

Brand

Package Options

ADG465BRT

–40

°C to +85°C

6-Lead Plastic Surface Mount SOT-23

S1B

RT-6

ADG465BRM

–40

°C to +85°C

8-Lead

µSOIC

S1B

RM-8

PIN CONFIGURATIONS

PIN FUNCTION DESCRIPTIONS

RT-6 RM-8 Pin Description

VD1, this is one terminal of the channel protec-

tor. The channel protector is bidirectional so this

terminal may be used as an input or an output.

1, 4

NC, this is a no connect pin.

VSS, Negative Power Supply (0 V to –20 V).

The clamping point for a negative overvoltage is

also defined by VSS, see Overvoltage Protection

section.

VS1, this is one terminal of the channel protec-

tor. The channel protector is bidirectional so this

terminal may be used as an output or an input.

5, 8

NC, this is a no connect pin.

VDD, Positive Power Supply (0 V to 20 V). The

clamping point for a positive overvoltage is also

defined by VDD, see Overvoltage Protection

section.

(RT-6)

TOP VIEW

(Not to Scale)

NC = NO CONNECT

ADG465

VD1

VS1

VDD

VSS

(RM-8)

TOP VIEW

(Not to Scale)

NC = NO CONNECT

ADG465

VDD

VSS

VD1

VS1

45 NC

WARNING!

ESD SENSITIVE DEVICE

ADG465 Datasheet(PDF) 3 Page - Analog Devices

ADG465 Datasheet(HTML) 3 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8

Datasheet Download

Link URL