| Electronic Components Datasheet Search |
|
9890 Datasheet(PDF) 4 Page - 3M Electronics |
|
|
|||||||||||||||||||||||||||||
9890 Datasheet(HTML) 4 Page - 3M Electronics |
|
4 / 5 page ![]() 3M™ Thermally Conductive Pads 5516 / 5516S 0.5, 1.0, 1.5, 2.0 3.1 5519/5519S 0.5, 1.0, 1.5, 2.0 4.9 5591S 0.5, 1.0, 1.5, 2.0 1.0 5592/5592S 0.5, 1.0, 1.5, 2.0 1.1 5595/5595S 0.5, 1.0, 1.5, 2.0 1.6 3M ™ Thermally Conductive Adhesive Transfer Tapes 9882 • 9885 • 9890 Application Guidelines (continued) 6.) Rework Tips: • Rework requires separation of the two substrates. Separation can be accomplished by any practical means: prying, torquing or peeling. The tape will be destroyed upon separation and must be replaced. The surfaces should be re- cleaned according to the recommendations in this data page. • Heating up the substrates can reduce the adhesion level and make removal easier. • Part separation can be aided by immersion in warm water. This should eventually reduce the adhesion and make prying, torquing or peeling apart the substrates easier. General Information Product selection table for 3M™ Thermally Conductive Materials. Bulk Thermal Thickness Conductivity Product (mm) (W/m-K) Typical Applications 3M™ Thermally Conductive Tapes 8805 0.127 8810 0.25 0.6 8815 0.375 8820 0.50 9889FR 1.0 0.5 Applications requiring thin bonding with good thermal transfer; CPU, flex circuit and power transformer bonding to heat sinks and other cooling devices. Superior tack and wetting properties. Applications requiring gap filling and bonding with good thermal transfer; plasma display, IC packages and PCB bonding to heat sinks, metal cases and other cooling devices. Applications requiring gap filling and superior thermal performance without bonding. IC package and PCB thermal interfacing with heat sinks or other cooling devices and metal cases. Application Ideas 3M™ Thermally Conductive Adhesive Transfer Tapes 9882, 9885, and 9890 are designed to provide a preferential heat- transfer path between heat-generating and cooling devices (e.g., fans, heat pipes and heat sinks). Only the “S” versions are available in 0.5 mm thicknesses. “S” designation signifies a polyester film on one side to provide a non-tacky surface. “H” designation signifies a product with one one-tacky surface without the use of PET film. (4) 3M™ Thermally Conductive Epoxy Adhesives TC-2707 — 0.7 TC-2810 — 1.0 DP-190 Gray — 0.4 Applications requiring high adhesive strength, good surface wet-out, gap filling and good thermal transfer. Provides IC package and PCB thermal interfacing with heat sinks or other cooling devices. 3M™ Thermally Conductive Pads (Acrylic) 5589H 1.0, 1.5 2.0 5590H 0.5, 1.0, 1.5 3.0 These pads use an acrylic elastomer for applications that require a non- silicone thermal pad. Provides IC package and PCB thermal interfacing with heat sinks or other cooling devices, and metal cases. |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |