| Electronic Components Datasheet Search |
|
LSM303DLHTR Datasheet(PDF) 33 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
LSM303DLHTR Datasheet(HTML) 33 Page - STMicroelectronics |
|
33 / 47 page ![]() LSM303DLH Registers description Doc ID 16941 Rev 1 33/47 The BDU bit is used to inhibit output register updates between the reading of the upper and lower register parts. In default mode (BDU = ‘0’), the lower and upper register parts are updated continuously. If it is not certain to read faster than output data rate, it is recommended to set BDU bit to ‘1’. In this way, after the reading of the lower (upper) register part, the content of that output register is not updated until the upper (lower) part is read also. This feature avoids reading LSB and MSB related to different samples. 9.1.5 CTRL_REG5_A (24h) TurnOn bits are used for turning on the sleep-to-wake function. By setting the TurnOn [1:0] bits to 11, the “sleep-to-wake” function is enabled. When an interrupt event occurs, the device goes into normal mode, increasing the ODR to the value defined in CTRL_REG1_A. Although the device is in normal mode, CTRL_REG1_A content is not automatically changed to “normal mode” configuration. 9.1.6 HP_FILTER_RESET_A (25h) Dummy register. Reading at this address instantaneously zeroes the content of the internal high-pass filter. If the high-pass filter is enabled, all three axes are instantaneously set to 0 g. This makes it possible to surmount the settling time of the high-pass filter. 9.1.7 REFERENCE_A (26h) Table 31. CTRL_REG5_A register 0 000 00 TurnOn1 TurnOn0 Table 32. CTRL_REG5_A description TurnOn1, TurnOn0 Turn-on mode selection for sleep-to-wake function. Default value: 00. Table 33. Sleep-to-wake configuration TurnOn1 TurnOn0 Sleep-to-wake status 0 0 Sleep-to-wake function is disabled 11 Turned on: The device is in low-power mode (ODR is defined in CTRL_REG1_A) Table 34. REFERENCE_A register Ref7 Ref6 Ref5 Ref4 Ref3 Ref2 Ref1 Ref0 Table 35. REFERENCE_A description Ref7 - Ref0 Reference value for high-pass filter. Default value: 00h. Obsolete Product(s) - Obsolete Product(s) |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |