 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
AYF530865 Datasheet(PDF) 5 Page - Panasonic Semiconductor |
|
|
|||||||||||||||||||||||||||||
AYF530865 Datasheet(HTML) 5 Page - Panasonic Semiconductor |
|
|
5 / 6 page  Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ AYF53 ACCTB1E 201204-T NOTES 1. Recommended PC board and metal mask patterns Connectors are mounted with high pitch density, intervals of 0.3 mm or 0.5 mm. In order to reduce solder bridges and other issues make sure the proper levels of solder is used. The figures to the right are recommended metal mask patterns. Please use them as a reference. • Y5B/Y5BW Recommended PC board pattern (mounting layout) (TOP VIEW) Recommended metal mask pattern Metal mask thickness: Here, 120 µm (Terminal portion opening area ratio: 31.8%) (Soldering terminal portion opening area ratio: 100%) 2. Precautions for insertion/removal of FPC Do not apply an excessive load to the lever in the opening direction beyond its open position; otherwise, the lever may be deformed or removed. Do not open/close the lever without an FPC inserted; otherwise, the terminals may be deformed, and the FPC insertion force may increase. Do not apply an excessive load to the lever in a direction perpendicular to the lever rotation axis or in the lever opening direction; otherwise, the terminals may be deformed, and the lever may be removed. These connectors are of the back lock type, which has the FPC insertion section on the opposite side of the lever. Carefully place the FPC in the insertion position or the lever opening/closing position. Otherwise, a contact failure or connector breakage may occur. These connectors have top and bottom double contacts. Do not insert an FPC upside down. Inserting an FPC in a direction opposite to that you intended may cause an operation failure or malfunction. Fully open the lever to insert an FPC. Completely insert the FPC horizontally. An FPC inserted at an excessive angle to the board may cause the deformation of metal parts, FPC insertion failures, and FPC circuit breakages. Insert the FPC to the full depth of the connector without altering the angle. To close the lever, turn down the lever by pressing the entire lever or both sides of the lever with fingers tips. If pressure to the lever is applied unevenly, such as to an edge only, it may deform or break. Also, make sure that the lever is closed completely. Not doing so will cause a faulty connection. Avoid applying an excessive load to the top of the lever during or after closing the lever. Otherwise, the terminals may be deformed. When opening the lever to remove the FPC, ensure that the lever will not go over the initial position; otherwise, the lever may be removed. Remove the FPC at parallel with the lever fully opened. If the lever is closed, or if the FPC is forcedly pulled, the product or FPC may break. If a lever is accidentally detached during the handling of a connector, do not use the connector any longer. After an FPC is inserted, carefully handle it so as not to apply excessive stress to the base of the FPC. 3. Cautions for using Y5BW The holding contacts cannot be used as conductors. The holding contacts are located on both ends of the contacts, and the shape of the soldered portions is the same as that of the other contacts. Use caution to ensure connect identification. 1.00 ±0.03 0.50 ±0.03 0.30 ±0.03 1.00 ±0.03 0.40 ±0.03 1.00 ±0.01 0.40 ±0.01 0.50 ±0.01 0.25 ±0.01 1.00 ±0.01 Please refer to the latest product specifications when designing your product. |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
