DAC8248FS datasheet(4/16 Pages) AD

4 / 16 page

DAC8248

–4–

REV. B

ORDERING GUIDE

Relative

Accuracy

Gain Error

Temperature

Package

Model

(+5 V or +15 V)

Range

Description

DAC8248AW

±1/2 LSB

±1 LSB

–55

°C to +125°C

24-Pin Cerdip

DAC8248EW

±1/2 LSB

±1 LSB

–40

°C to +85°C

24-Pin Cerdip

DAC8248GP

±1/2 LSB

±2 LSB

°C to +70°C

24-Pin Plastic DIP

DAC8248FW

±1 LSB

±4 LSB

–40

°C to +85°C

24-Pin Cerdip

DAC8248HP

±1 LSB

±4 LSB

°C to +70°C

24-Pin Plastic DIP

DAC8248FP

±1 LSB

±4 LSB

–40

°C to +85°C

24-Pin Plastic DIP

DAC8248HS

±1 LSB

±4 LSB

°C to +70°C

24-Pin SOL

NOTES

1Burn-in is available on commercial and industrial temperature range parts in cerdip, plastic DIP, and TO-can packages.

2For devices processed in total compliance to MIL-STD-883, add/883 after part number. Consult factory for 883 data sheet.

3For availability and burn-in information on SO and PLCC packages, contact your local sales office.

(continued from page 1)

operates on a single supply from +5 V to +15 V, and it dissi-

pates less than 0.5 mW at +5 V (using zero or VDD logic levels).

The device is packaged in a space-saving 0.3", 24-pin DIP.

The DAC8248 is manufactured with PMI’s highly stable thin-

film resistors on an advanced oxide-isolated, silicon-gate,

CMOS technology. PMI’s improved latch-up resistant design

eliminates the need for external protective Schottky diodes.

ABSOLUTE MAXIMUM RATINGS

(TA = +25°C, unless otherwise noted.)

VDD to AGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 V, +17 V

VDD to DGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 V, +17 V

AGND to DGND . . . . . . . . . . . . . . . . . . –0.3 V, VDD +0.3 V

Digital Input Voltage to DGND . . . . . . . –0.3 V, VDD +0.3 V

IOUT A, IOUT B to AGND . . . . . . . . . . . . . . –0.3 V, VDD +0.3 V

VREF A, VREF B to AGND . . . . . . . . . . . . . . . . . . . . . . . .

±25 V

VRFB A, VRFB B to AGND . . . . . . . . . . . . . . . . . . . . . . . .

±25 V

Operating Temperature Range

AW Version . . . . . . . . . . . . . . . . . . . . . . . –55

°C to +125°C

EW, FW, FP Versions . . . . . . . . . . . . . . . . –40

°C to +85°C

GP, HP, HS Versions . . . . . . . . . . . . . . . . . . . 0

°C to +70°C

Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . +150

°C

Storage Temperature . . . . . . . . . . . . . . . . . . –65

°C to +150°C

Lead Temperature (Soldering, 60 sec) . . . . . . . . . . . . +300

°C

Package Type

Units

24-Pin Hermetic DIP (W)

°C/W

24-Pin Plastic DIP (P)

°C/W

24-Pin SOL (S)

°C/W

NOTE

JA specified for worst case mounting conditions, i.e.,

JA is specified for device in

socket for cerdip and P-DIP packages; JA is specified for device soldered to printed

circuit board for SOL package.

CAUTION

1. Do not apply voltages higher than VDD or less than GND

potential on any terminal except VREF and RFB.

2. The digital control inputs are Zener-protected; however,

permanent damage may occur on unprotected units from

high energy electrostatic fields. Keep units in conductive

foam at all times until ready to use.

3. Do not insert this device into powered sockets; remove

power before insertion or removal.

4. Use proper antistatic handling procedures.

5. Devices can suffer permanent damage and/or reliability deg-

radation if stressed above the limits listed under Absolute

Maximum Ratings for extended periods. This is a stress rat-

ing only and functional operation at or above this specifica-

tion is not implied.

WARNING!

ESD SENSITIVE DEVICE

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection.

Although the DAC8248 features proprietary ESD protection circuitry, permanent damage may

occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD

precautions are recommended to avoid performance degradation or loss of functionality.

DAC8248FS Datasheet(PDF) 4 Page - Analog Devices

DAC8248FS Datasheet(HTML) 4 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Datasheet Download

Link URL