CDCLVD110AVF datasheet(8/18 Pages) TI

8 / 18 page

CDCLVD110A

SCAS841C – FEBRUARY 2007 – REVISED NOVEMBER 2009

www.ti.com

PARAMETER MEASUREMENT INFORMATION

Output skew, tsk(o), is calculated as the greater of:

– The difference between the fastest and the slowest tPLHn (n = 1, 2,...10)

– The difference between the fastest and the slowest tPHLn (n = 1, 2,...10)

Part-to-part skew, tsk(pp), is calculated as the greater of:

– The difference between the fastest and the slowest tPLHn (n = 1, 2,...10) across multiple devices

– The difference between the fastest and the slowest tPHLn (n = 1, 2,...10) across multiple devices

Pulse skew, tsk(p), is calculated as the magnitude of the absolute time difference between the high-to-low (tPHL) and

the low-to-high (tPLH) propagation delays when a single switching input causes one or more outputs to switch, tsk(p) = |

tPHL – tPLH |. Pulse skew is sometimes referred to as pulse-width distortion or duty-cycle skew.

Figure 1. Waveforms for Calculation of tsk(o) and tsk(pp)

Submit Documentation Feedback

Product Folder Link(s): CDCLVD110A

CDCLVD110AVF Datasheet(PDF) 8 Page - Texas Instruments