LM611IM datasheet(2/28 Pages) TI

2 / 28 page

LM611

SNOSC08C – MAY 1998 – REVISED MARCH 2013

www.ti.com

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1) (2)

Voltage on Any Pins Except VR (referred to V

− pin)

36V (Max)

See(3)

−0.3V (Min)

Current through Any Input Pin and VR Pin

±20 mA

Differential Input Voltage

Military and Industrial

±36V

Commercial

±32V

Storage Temperature Range

−65°C≤TJ≤+150°C

Maximum Junction Temperature

150°C

Thermal Resistance, Junction-to-Ambient(4)

N Package

100°C/W

D Package

150°C/W

Soldering Information Soldering (10 seconds)

N Package

260°C

D Package

220°C

ESD Tolerance(5)

±1 kV

(1)

Absolute maximum ratings indicate limits beyond which damage to the component may occur. Electrical specifications do not apply

when operating the device beyond its rated operating conditions.

(2)

If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and

specifications.

(3)

More accurately, it is excessive current flow, with resulting excess heating, that limits the voltages on all pins. When any pin is pulled a

diode drop below V−, a parasitic NPN transistor turns ON. No latch-up will occur as long as the current through that pin remains below

the Maximum Rating. Operation is undefined and unpredictable when any parasitic diode or transistor is conducting.

(4)

Junction temperature may be calculated using TJ = TA + PD θJA. The given thermal resistance is worst-case for packages in sockets in

still air. For packages soldered to copper-clad board with dissipation from one op amp or reference output transistor, nominal

θJA is

90°C/W for the N package and 135°C/W for the D package.

(5)

Human body model, 100 pF discharged through a 1.5 k

Ω resistor.

Operating Temperature Range

LM611AI, LM611I, LM611BI

−40°C≤TJ≤+85°C

LM611AM, LM611M

−55°C≤TJ≤+125°C

LM611C

0°C

≤TJ≤70°C

Submit Documentation Feedback

Product Folder Links: LM611

LM611IM Datasheet(PDF) 2 Page - Texas Instruments

LM611IM Datasheet(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Datasheet Download

Link URL