Copyright © Parallax Inc.

Eddie Robot Platform (#28990 & #28992)

v1.2 11/10/2011 Page 14 of 16

Rotate or “cam” the hook into the slot as shown in Figure 11c. Do the same with the remaining cam

hook in the other slot.

Figure 11c

The assembly should now look like the one shown in Figure 11d.

Figure 11d

Place the Mounting Plate onto the bottom of the Kinect, such that the Cam Hooks go into the rectangular

holes. The Cam Hooks will not come all the way through – they’ll be just below the surface of the acrylic.

Now, place washers onto the 4-40 x ¼” long, black, pan head phillips screws and screw them into the

tapped holes in the bottom of the Kinect Cam Hooks, as shown in Figure 11e.

Figure 11e