13

4

The Connector Block (A) is required to illuminate the backlight of the DEM

KIT while programming through the USB Type A-mini B cable.

Connect as

shown,

prior to

connecting to the

USB cable.

Note the orienta-

tion of the Connector

Block to that of the

DEM KIT.

The Connector

Block is used ONLY

during the program-

ming phase; it is not

used with the Battery

Box option.

HARDWARE INSTALLATION

Pin 1

Connector Block (A)

(35.0)

1.378

(70.0)

2.756

(100.0)

3.937

(OPTIONAL) BATTERY BOX SPECIFICATIONS

Power Switch

Knob to cycle

through bimaps for

both IS15 and IS01

Switch to direct the

sequence of bitmaps for

Connector for IS

Easy Display Kit

The Battery Box provides portability to

demonstrate functionality without any

system connections.

• Power Switch activates power

• FWD/REV Switch directs sequences

• Knob for cycling bitmaps may also

simulate animation

• Socket to mount IS Easy Display Controller

• Battery holder accommodates four (4) AA

alkaline batteries (not included)

Note: Orientation of DEM

KIT–1 or DEM KIT–2

to Battery Box