DS1386/DS1386P

2 of 20

ORDERING INFORMATION

DS1386

XX-120

32-pin DIP Module

08

8k x 8 NV SRAM

32

32k x 8 NV SRAM

*DS1386P

XX-120

08

8k x 8 NV SRAM

32

32k x 8 NV SRAM

*DS9034PCX

PowerCap required

(must be ordered separately)

PIN DESCRIPTION

INTA

- Interrupt Output A (open drain)

INTB

(INTB)

- Interrupt Output B (open drain)

A0-A14

- Address Inputs

DQ0-DQ7

- Data Input/Output

CE

- Chip Enable

OE

- Output Enable

WE

- Write Enable

- +5V

GND

- Ground

SQW

- Square Wave Output

NC

- No Connection

X1, X2

- Crystal Connection

- Battery Connection

DESCRIPTION

The DS1386 is a nonvolatile static RAM with a full-function Real Time Clock (RTC), alarm, watchdog

timer, and interval timer which are all accessible in a byte-wide format. The DS1386 contains a lithium

energy source and a quartz crystal, which eliminates the need for any external circuitry. Data contained

within 8k or 32k by 8-bit memory and the timekeeping registers can be read or written in the same

manner as bytewide static RAM. The timekeeping registers are located in the first 14 bytes of memory

space. Data is maintained in the RAMified Timekeeper by intelligent control circuitry, which detects the

hundredths of seconds, seconds, minutes, hours, day, date, month, and year. The date at the end of the

month is automatically adjusted for months with less than 31 days, including correction for leap year.

The RAMified Timekeeper operates in either 24-hour or 12-hour format with an AM/PM indicator. The

watchdog timer provides alarm interrupts and interval timing between 0.01seconds and 99.99 seconds.

The real time alarm provides for preset times of up to one week. Interrupts for both watchdog and RTC

will operate when system is powered down. Either can provide system “wake-up” signals.