DATA SHEET

The information in this document is subject to change without notice. Before using this document, please

confirm that this is the latest version.

Not all products and/or types are available in every country. Please check with an NEC Electronics

sales representative for availability and additional information.

PHOTOCOUPLER

PS9513,PS9513L1,PS9513L2,PS9513L3

1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE

INTELLIGENT POWER MODULE

8 mm CREEPAGE 8-PIN DIP HIGH-SPEED PHOTOCOUPLER

−NEPOC Series−

Document No. PN10679EJ03V0DS (3rd edition)

Date Published September 2009 NS

Printed in Japan

2007, 2009

The mark <R> shows major revised points.

The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.

DESCRIPTION

The PS9513, PS9513L1, PS9513L2 and PS9513L3 are optically coupled isolators containing a GaAlAs LED on the

input side and a photo diode and a signal processing circuit on the output side on one chip.

The PS9513 is designed specifically for high common mode transient immunity (CMR) and low pulse width

distortion with operating temperature. It is suitable for IPM drive.

The PS9513L1 is lead bending type for long creepage distance.

The PS9513L2 is lead bending type for long creepage distance (Gull-wing) for surface mount.

The PS9513L3 is lead bending type (Gull-wing) for surface mounting.

FEATURES

• Long creepage distance (8 mm MIN. : PS9513L1, PS9513L2)

±15 kV/

• Open collector output

• Ordering number of tape product : PS9513L2-E3 : 1 000 pcs/reel

: PS9513L3-E3 : 1 000 pcs/reel

• Pb-Free product

• Safety standards

• UL approved: No. E72422

• CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)

• BSI approved: No. 8937, 8938

• SEMKO approved: No. 615433

• NEMKO approved: No. P06207243

• DEMKO approved: No. 314091

• FIMKO approved: No. FI 22827

• DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40019182 (Option)

APPLICATIONS

• IPM Driver

• General purpose inverter

1. NC

2. Anode

3. Cathode

4. NC

5. GND

7. NC

1

2

4

3

6

5

8

7

PIN CONNECTIONS

(Top View)

<R>

<R>