UPD17010 datasheet(71/424 Pages) NEC

Part #	UPD17010

Description	4-BIT SINGLE-CHIP MICROCONTROLLER WITH HARDWARE DEDICATED TO DIGITAL TUNING SYSTEM

PDF	424 Pages

Scroll/Zoom	100%

Manufacturer	NEC [NEC]

Direct Link	http://www.nec.com/

Logo

71 / 424 page

µPD17010

9.2.2 Table reference instruction (“MOVT DBF, @AR”)

The operation of the “MOVT DBF, @AR” instruction is described next.

When the table reference instruction is executed, one stack level is used.

All the program memory addresses, 0000H through 1EFBH, can be referenced.

MOVT DBF, @AR

This instruction reads the contents of the program memory addressed by the contents of the address register to

the data buffer.

9.2.3 Peripheral hardware control instructions (“PUT”, “GET”)

The operations of the “PUT” and “GET” instructions are described next.

(1) GET DBF, p

Reads the data of the peripheral register addressed by p to the data buffer.

(2) PUT p, DBF

Sets the data of the data buffer to the peripheral register addressed by p.

9.3 List of Peripheral Hardware and Data Buffer Functions

Table 9-1 lists the functions of the peripheral hardware and data buffer.

UPD17010 Datasheet(PDF) 71 Page - NEC