Application work area

UM1599

12/17

DocID024146 Rev 1

4.3.3

RC startup wizard

In applications using the internal STPM01 or STPM10 RC oscillator, the configuration bit RC

has to be set to start the internal oscillator. Since the SPI communication requires clocking,

to set this bit, a special sequence of steps has to be followed. This sequence is

automatically implemented in the GUI and accessible from the “Tools”-”RC Startup Wizard”

menu.

For further information on this topic refer to STPM01 or STPM10 datasheet.

5

Application work area

The application work area is divided into several read/write sections logically grouping the

device relevant information.

In this way, the device status and the register’s readings are always available to the user at

a single glance.

Figure 12. Application work area

5.1

Device selection

On the top right of the work area, a group-box is available to select the device. The

application work area changes according to the selected device’s features.