AN3108 datasheet(21/44 Pages) STMICROELECTRONICS

21 / 44 page

AN3108

STLM75 library firmware

Doc ID 16793 Rev 1

21/44

Example:

TS_I2C_SettingsType TempSensorI2C_Settings;

/* Enable I2C2 clock */

RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C2, ENABLE);

/* I2C Peripheral settings initialization */

TempSensorI2C_Settings.TS_I2C_Ptr

= I2C2;

TempSensorI2C_Settings.TS_I2C_Clock

= 0x90;

TempSensorI2C_Settings.TS_I2C_Address = 400000;

pObjTempSensor->SetI2C_Settings(pObjTempSensor,

&TempSensorI2C_Settings);

TempSensor:: SetSignals API function

Table 9 describes the SetSignals function of the TempSensor structure.

This function is called by the TempSensor:Init function during the initialization phase,

therefore it’s not necessary to directly call it. The final application can specifically call this

function in order to change the microcontroller signal (port, pin, mode) settings after

initialization.

Table 9.

SetSignals

Name

Description

Function name

SetSignals

Function prototype

TS_ErrStatus SetSignals (TempSensorType* pThis, TS_SignalsType*

pSignals)

Behavior description

Set the STLM75 signals (port and pin) using the right values from the

passed parameter

Input parameter {x}

pThis - Object pointer;

pSignals - A Signal collection structure pointer;

Output parameter {x}

None

Return value

TS_OK if successful, TS_ERROR otherwise

Required preconditions

NewTempSensorObj function must have been called before.

Called functions

HAL function:

void TS_ConfigSignal(TS_SignalType* pSignal)

AN3108 Datasheet(PDF) 21 Page - STMicroelectronics

AN3108 Datasheet(HTML) 21 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

Datasheet Download

Link URL