| Electronic Components Datasheet Search |
|
AN2549 Datasheet(PDF) 13 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN2549 Datasheet(HTML) 13 Page - STMicroelectronics |
|
13 / 33 page ![]() AN2549 Modified features 13/33 1.7.1 Hardware impact None. 1.7.2 Software impact None if the software is not writing to PICON bit 5 (P6LIN). 1.8 Ports output control In the ST10F269Zx, the port output control registers POCONx are used to select the output driver characteristics of a port. In this way, the output drivers can be adapted to the application’s requirements, and eventually, the EMI behavior of the device can be improved. Two characteristics may be selected: ● Edge characteristic defines the rise/fall time for the respective outputs, that is, the transition time. Slow edge reduces the peak currents that are sunk/sourced when changing the voltage level of an external capacitive load. ● Driver characteristic defines either the general driving capability of the respective drivers, or if the driver strength is reduced after the target output level has been reached or not. Reducing the driver strength increases the output’s internal resistance, which attenuates noise that is imported via the output line. This feature is not available on the ST10F272Z2. 1.8.1 Hardware impact Some modifications might be needed depending on the usage of this functionality. 1.8.2 Software impact Parts related to the initialization of the POCONx registers should be suppressed. 1.9 PLL and main on-chip oscillator Compared to the ST10F269Zx, several modifications have been introduced: ● PLL multiplication factors have been adapted in order to match the new frequency range. ● On-chip main oscillator input frequency range has been reshaped, reducing it to 4 to 8 MHz: This allows the power consumption to be reduced when the Real Time Clock is Table 10. PICON register description Bit Function Reset value PxLIN Port x Low Byte Input Level Selection 0: Pins Px.7..0 switch on standard TTL input levels 1: Pins Px.7..0 switch on CMOS input levels 0 PxHIN Port x High Byte Input Level Selection 0: Pins Px.15..8 switch on standard TTL input levels 1: Pins Px.15..8 switch on CMOS input levels 0 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |