LC87F0N04A

No.A2055-4/19

Standby Function

● HALT mode: Halts instruction execution while allowing the peripheral circuits to continue operation.

1) Oscillation is not halted automatically.

2) There are three ways of resetting the HALT mode.

(1) Setting the reset pin to the low level

(2) System resetting by watchdog timer or low-voltage detection

(3) Occurrence of an interrupt

● HOLD mode: Suspends instruction execution and the operation of the peripheral circuits.

1) The RC oscillators automatically stop operation.

2) There are four ways of resetting the HOLD mode.

(1) Setting the reset pin to the lower level.

(2) System resetting by watchdog timer or low-voltage detection

(3) Having an interrupt source established at either INT0, INT1, INT2

* INT0 and INT1 HOLD mode reset is available only when level detection is set.

On-chip Debugger

Supports software debugging with the IC mounted on the target board.

Data Security Function (flash versions only)

Protects the program data stored in flash memory from unauthorized read or copy.

Note: This data security function does not necessarily provide absolute data security.

Development Tools

On-chip-debugger : TCB87 TypeC + LC87F0N04A

Programming Boards

Package

Programming boards

SSOP16(225mil)

W87F0NS

Flash ROM Programmer

Maker

Model

Supported version

Device

Flash Support Group, Inc.

(FSG)

Single

Programmer

AF9709/AF9709B/AF9709C

(Including Ando Electric Co., Ltd. models)

Rev 03.28 or later

87F008SU

(3B247)

Gang

Programmer

AF9723/AF9723B(Main body)

(Including Ando Electric Co., Ltd. models)

-

-

AF9833(Unit)

(Including Ando Electric Co., Ltd. models)

-

-

Sanyo

Single/Gang

Programmer

SKK / SKK Type B

(SanyoFWS)

Application Version

1.07 or later

Chip Data Version

2.40 or later

LC87F0N04

Gang

Programmer

SKK-4G

(SanyoFWS)

In-circuit/Gang

Programmer

SKK-DBG Type C

(SanyoFWS)

Application Version

1.07 or later

Chip Data Version

2.40 or later

For information about AF-Series:

Flash Support Group, Inc.

TEL: +81-53-459-1050

E-mail: sales@j-fsg.co.jp