SL13A-ASWB datasheet(30/49 Pages) AMSCO

30 / 49 page

SL13A – 30

ams Datasheet: 2014-May-06 [v1-01]

C o mmands

Data Log Format

The SL13A device supports 3 different data log formats. The

data log format depends on the Logging form. The data log

formats are defined as follows:

Dense mode:

Limits mode without battery check:

Limits mode with battery check:

In Dense mode there is no Measurement number included,

because every measurement is stored to the EEPROM.

The Logging form is set with the Set Log Mode command and

is stored in the Bit30 and Bit29 in the Log mode field in the

EEPROM.

Figure 19:

Bit30, Bit29

b31 - b30

b29

b20

b19

b10

Temp. value 3

Temp. value 2

Temp. value 1

b31

b20

b19

b10

Measurement #

Temp. value

b31

b20

b19

b10

Measurement #

Battery value

Temp. value

Bit30

Bit29

Logging Form

Description

Dense

All values are stored to the measurement area. There are 3

10bit temperature values in each EEPROM block. The

upper 2 bits are 0. No Battery voltage storage is possible in

this mode.

All values out of limits

All values that are out of the specified limits are stored to

the measurement area. There is only 1 measurement in

each EEPROM block. The temp. value is in the lower 10 bits

(b9 – b0). If Battery check is set to 1, the battery value is

stored to the next 10 bits. The upper 12 bits hold the

number of the measurement.

Not allowed

Option not supported

Limits crossing

Only the crossing point of each limit boundary is stored.

There is only 1 measurement in each EEPROM block. The

temp. value is in the lower 10 bits (b9 – b0). If Battery check

is set to 1, the battery value is stored to the next 10 bits.

The upper 12 bits hold the number of the measurement.

SL13A-ASWB Datasheet(PDF) 30 Page - ams AG

SL13A-ASWB Datasheet(HTML) 30 Page - ams AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

Datasheet Download

Link URL