Data Sheet TLE 6225 G

V2.1

Page

26.Aug. 2002

9

Package and ordering code

all dimensions in mm

P - DSO - 20 - 6

Ordering code

TLE 6225 G

Q 67006 A9373

Published by

Infineon Technologies AG,

Bereichs Kommunikation

St.-Martin-Strasse 76,

D-81541 München

© Infineon Technologies AG 1999

All Rights Reserved.

Attention please!

The information herein is given to describe certain components and shall not be considered as warranted characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits,

descriptions and charts stated herein.

Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Tech-

nologies Office in Germany or our Infineon Technologies Representatives worldwide (see address list).

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question

please contact your nearest Infineon Technologies Office.

Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of

Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support

device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are in-

tended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it

is reasonable to assume that the health of the user or other persons may be endangered.

110

11

20

Index Marking

1) Does not include plastic or metal protrusions of 0.15 max per side

2) Does not include dambar protrusion of 0.05 max per side

GPS05094

0.1

+0.15

0.35

1.27

2)

0.2 24x

-0.2

7.6

1)

0.35 x 45˚

+0.8

±0.3

10.3

0.4

1)