M02016

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

http://www.macom.com/support

14

CMOS Transimpedance Amplifier with AGC

for Fiber Optic Networks up to 1.25 Gbps

Rev V4

4.2

TO-Can Layout

4.3

Treatment of PINK

PINK requires bypassing to ground with a capacitor when powering a photo diode. If PINK is not used to bias the

photo diode, then it is not necessary to bypass an unused PINK.

Figure 4-2.

Typical Layout Diagram

Notes:

Typical application inside of a 5 lead TO-Can.

more GND pads connected may improve performance). The backside must be connected to the lowest potential,

usually ground, with conductive epoxy or a similar die attach material. If a monitor output is not required then a 4

lead TO-Can may be used.

GND

GND

MON

DOUT

DOUTB

1nF

470pF