Copyright © 2016 Future Technology Devices International Limited

1

FT600Q-FT601Q IC DatasheetDatasheet

Version 1.02

Doc ument N o.: FT _001118

C learance N o.: FT DI#424

Future Technology

Devices International

FT600Q-FT601Q IC

Datasheet

(USB 3.0 to FIFO Bridge)

The FT600/FT601 is a USB 3.0 to FIFO interface

bridge chip with the following advanced features:



Supports USB 3.0 Super Speed (5Gbps)/USB

2.0 High Speed (480Mbps)/USB 2.0 Full

Speed (12Mbps) transfer.



Supported

USB

Transfer

Type:

Control/Bulk/Interrupt



Up to 8 configurable endpoints (PIPEs).



Supports 2 parallel slave FIFO bus protocols

245 and FIFO mode, FT601 with 32 bit

parallel interface has a data bursting rate up

to 400MB/s.



Supports 4 IN channels and 4 OUT channels

on FIFO bus connectivity.



Built-in 16kB FIFO data buffer RAM.



Supports Remote Wakeup capability.



Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.



Configurable GPIO support.



Internal LDO 1.0V regulator.



Integrated power-on-reset circuit.



User programmable USB descriptors.



Supports Battery Charging spec. BC1.2.



Available as FT600-16bit/FT601-32bit FIFO interface.



Industrial operating temperature range: -40 to 85⁰C.



Available in compact Pb-free QFN-76(32bit) and QFN-

56(16bit) packages (both RoHS compliant).

N either the whole nor any part of the information c ontained in, or the product desc ribed in this manual, may be adapted or reproduced

in any material or electronic form without the prior written cons ent of the copyright holder. This product and its documentat ion are

s upplied on an as-is basis and no warranty as to their s uitability for any partic ular purpose is either made or implied. Future T ec hnology

Devices International Ltd will not accept any claim for damages hows oever aris ing as a res ult of us e or failure of this produc t. Y our

s tatutory rights are not affec ted. T his produc t or any variant of it is not intended for use in any medical appliance, device or sys tem in

whic h the failure of the produc t might reasonably be expec ted to res ult in personal injury. T his doc ument provides preliminary

information that may be s ubjec t to c hange without notice. N o freedom to us e patents or other intellec tual property rights is implied by

the public ation of this document. Future Tec hnology Devic es I nternational Ltd, U nit 1 , 2 Seaward P lace, C enturion Business Park,

Glas gow G4 1 1 HH U nited Kingdom. Sc otland Registered Company N umber: SC136640