600V or 1200V max.

200 mA / 420 mA

10 - 20V or 12 - 20V

750/700 ns

Deadtime (typ.)

250 ns

Product Summary

3-PHASE BRIDGE DRIVER

Data Sheet No. PD60107 revU

www.irf.com

1

Features

Fully operational to +600V or+1200V

Tolerant to negative transient voltage

dV/dt immune

up to 25V for transient

Description

The IR2133IR2135/IR2233IR2355 (J&S) are high voltage, high

speed power MOSFET and IGBT driver with three independent

high side and low side referenced output channels for 3-phase

applications. Proprietary HVIC technology enables ruggedized

monolithic construction. Logic inputs are compatible with CMOS

or LSTTL outputs, down to 2.5V logic. An independent opera-

tional amplifier provides an analog feedback of bridge current via an external current sense resistor. A current trip

function which terminates all six outputs can also be derived from this resistor. A shutdown function is available to

terminate all six outputs. An open drain FAULT signal is provided to indicate that an over-current or undervoltage

shutdown has occurred. Fault conditions are cleared with the FLT-CLR lead. The output drivers feature a high pulse

current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in

high frequency applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the

high side configuration which operates up to 600 volts or 1200 volts.

up to 600V or 1200V

Typical Connection

(Refer to Lead Assignments for correct pin configuration). This/These diagram(s) show electrical connections only.

Please refer to our Application Notes and DesignTips for proper circuit board layout.

Packages

28-Lead SOIC

44-Lead PLCC w/o 12 leads

28-Lead PDIP