Mute Function

Sometimes we need quiet and don

¢t want to hear the ring sound at some situations such as during

sleeping, meeting or resting.

· The HT95168 provides the [Mute] function to stop the ring sound at a certain desired period.

· At On-hook state, press the [*], [2], [*], [four-digit number], [#] to set the ring sound mute period.

· [Four-digit number] expresses 2-digit hour with 2-digit minute, the setting range is from 99 hours

with 99 minutes to 0 hour with 1 minute.

· After setting, if the timer counts down to zero, the ring sound function is enabled.

Note

It can receive Caller ID data normally during mute period. The initial setting of this function is dis-

abled.

Area & Long Distance Code Screen Setting

At On hook state, press the [*], [3], [*], [1~8 digits number], [#] to set the local area code or long dis-

tance code to store the caller ID phone number.

· For example, when pressing the [*] [3] [*] [0755] [#], if there¢s an incoming call with a number

075527089253, then it will automatically screen the 0755 phone number prefix and it only stores

the 27089253.

· Press the [*], [3], [*], [#] to disable the screen function and the LCD shows [Loc off].

Dual System Caller ID Setting

· When you plug the phone line into RJ11 jack to power-on reset the telephone, once a first caller

ID incoming call occurs, the HT95168 can automatically fix the caller ID receiving format

whether FSK or DTMF standard.

· You can alternately change the caller ID receiving format by pressing the [*] [*] [#] input.

· Each incoming call can be stored with a maximum of 14-digit phone number including one of the

digits with automatically added

¢0¢ when the phone number length is more than 9-digit, except

for area code set to screen

¢0¢ and mobile phone number with ¢13¢ prefix.

Incoming Call Check and Call Back

The HT95168 stores 27-set incoming calls and each call with 8-digit length or 21-set with 12-digit

or 19-set with 14-digit length.

· When the [Up] key is pressed, the LCD shows the [Incoming] icon and incoming call records

through last in first out, LIFO rule from latest record to earliest record until the end pointer. Each

incoming call is divided into two records, first is [Pointer-Date-Time], last is [Incoming phone

number which has a maximum of 14-digit].

· Oppositely, when the [Down] key is pressed, it shows first is [Incoming phone number], last is

[Pointer-Date-Time] through LIFO rule from the earliest record to the latest record until the end

pointer.

· Each incoming call record can be erased by pressing the [Delete] key.

· Each incoming call record can be dialed out by pressing the [Call back/Redial] key or the [Add

¢0¢ Call back] key.

HT95168

Rev. 1.10

7

March 22, 2004