LM6182AMN datasheet(6/24 Pages) NSC

6 / 24 page

±5V AC Electrical Characteristics

The following specifications apply for supply voltage = ±5V, Vcm = V

O = 0V, Rf = 820Ω, and RL = 1kΩ unless otherwise

noted. Boldface limits apply at the temperature extremes; all other limits T

J = 25˚C.

Symbol

Parameter

Conditions

Typical

(Note 5)

LM6182AM

LM6182AI

LM6182I

Units

Limit

(Note 6)

Crosstalk Rejection

(Note 7)

Closed Loop Bandwidth −3 dB

V = +2

MHz

V = +10

V = −1

V = −10

Closed Loop Bandwidth

V = +2, RL = 150Ω

0.1 dB Flat, R

SOURCE = 200Ω

PBW

Power Bandwidth

V = −1, VO = 4VPP

Slew Rate

V = −1, VO = ±2V

500

375

V/µs

L = 150Ω, (Note 8)

min

Settling Time (0.1%)A

V = −1, VO = ±2V

L = 150Ω

r,tf

Rise and Fall Time

O = 1VPP

8.5

Propagation Delay Time

O = 1VPP

in(+)

Non-Inverting Input Noise

Current Density

f = 1 kHz

pA/

√Hz

in(−)

Inverting Input Noise

Current Density

f = 1 kHz

pA/

√Hz

Input Noise Voltage Density

f = 1 kHz

nV/

√Hz

Second Harmonic Distortion

O = 2VPP,f = 10 MHz

-45

dBc

V = +2

Third Harmonic Distortion

O = 2VPP,f = 10 MHz

-55

V = +2

Differential Gain

L = 150Ω

0.06

V = +2, NTSC

Differential Phase

L = 150Ω

0.16

Deg

V = +2, NTSC

THD

Total Harmonic Distortion

O = 2VPP,AV = +2,

0.36

f = 5 MHz, R

L = 150Ω

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating ratings indicate conditions for which the device is in-

tended to be functional, but device parameter specifications may not be guaranteed under these conditions. For guaranteed specifications and test conditions, see

the Electrical Characteristics.

Note 2: Human body model 100 pF and 1.5 k

Ω.

Note 3: The typical junction-to-ambient thermal resistance of the molded plastic DIP(N) soldered directly into a PC board is 95˚C/W. The junction-to-ambient thermal

resistance of the S.O. surface mount (M) package mounted flush to the PC board is 70˚C/W when pins 1,4,8,9 and 16 are soldered to a total of 2 in2 1 oz copper

trace. The S.O. (M) package must have pin 4 and at least one of pins 1,8,9, or 16 connected to V− for proper operation.

Note 4: Continuous short circuit operation at elevated ambient temperature can result in exceeding the maximum allowable junction temperature of 150˚C. Each am-

plifier of the LM6182 is short circuit current limited to 100 mA typical.

Note 5: Typical values represent the most likely parametric norm.

Note 6: All limits are guaranteed at room temperature (standard type face) or at operating temperature extremes (boldface type).

Note 7: Each amp excited in turn with 100 kHz to produce Vo = 2 Vpp. Results are input referred.

Note 8: Measured from +25% to +75% of output waveform.

Note 9: Also available per the Standard Military Drawing, 5962-9460301MCA.

Note 10: For guaranteed military specifications see military datasheet MNLM6182AM-X.

LM6182AMN Datasheet(PDF) 6 Page - National Semiconductor (TI)

LM6182AMN Datasheet(HTML) 6 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Datasheet Download

Link URL