LMV981 datasheet(7/18 Pages) NSC

7 / 18 page

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is

intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics.

Note 2: Human body model, 1.5k

Ω in series with 100pF. Machine model, 200Ω in series with 100pF.

Note 3: Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the

maximum allowed junction temperature of 150˚C. Output currents in excess of 45mA over long term may adversely affect reliability.

Note 4: The maximum power dissipation is a function of TJ(MAX) , θJA, and TA. The maximum allowable power dissipation at any ambient temperature is

PD =(TJ(MAX)–T A)/θJA. All numbers apply for packages soldered directly into a PC board.

Note 5: Typical Values represent the most likely parametric norm.

Note 6: All limits are guaranteed by testing or statistical analysis.

Note 7: V+ = 5V. Connected as voltage follower with 5V step input. Number specified is the slower of the positive and negative slew rates.

Note 8: For guaranteed temperature ranges, see Input Common-Mode Voltage Range specifications.

Note 9: Input referred, V+ = 5V and RL = 100kΩ connected to 2.5V. Each amp excited in turn with 1kHz to produce VO =3VPP.

Note 10: Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating

of the device such that TJ =TA. No guarantee of parametric performance is indicated in the electrical tables under conditions of internal self heating where TJ > TA.

See Applications section for information on temperature derating of this device. Absolute Maximum Ratings indicated junction temperature limits beyond which the

device may be permanently degraded, either mechanically or electrically.

Connection Diagrams

6-Bump micro SMD

6-Pin SC70-6/SOT23-6

10-Pin MSOP

200214G6

Top View

200214G7

Top View

20021435

Top View

Ordering Information

Package

Part Number

Packaging Marking

Transport Media

NSC

Drawing

6-Bump micro SMD

LMV981BL

250 Units Tape and Reel

BLA006AAB

LMV981BLX

3k Units Tape and Reel

6-Pin SC70

LMV981MG

A77

1k Units Tape and Reel

MAA06A

LMV981MGX

3k Units Tape and Reel

6-Pin SOT23

LMV981MF

A78A

1k Units Tape and Reel

MF06A

LMV981MFX

3.5k Units Tape and Reel

10-Pin MSOP

LMV982MM

A87A

1k Unit Tape and Reel

MUB10A

LMV982MMX

3.5k Unit Tape and Reel

LMV981 Datasheet(PDF) 7 Page - National Semiconductor (TI)

LMV981 Datasheet(HTML) 7 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Datasheet Download

Link URL