STSPIN32F0 datasheet(4/40 Pages) STMICROELECTRONICS

4 / 40 page

Description

STSPIN32F0

4/40

DocID029806 Rev 2

Description

The STSPIN32F0 is a System-In-Package providing an integrated solution suitable for

driving three-phase BLDC motors using different driving modes.

It embeds a triple half-bridge gate driver able to drive power MOSFETs or IGBTs with a

current capability of 600 mA (sink and source). The high- and low-side switches of same

half-bridge cannot be simultaneously driven high thanks to an integrated interlocking

function.

An internal DC/DC buck converter provides the 3.3 V voltage suitable to supply both the

MCU and external components. An internal LDO linear regulator provides the supply

voltage for gate drivers.

The integrated operational amplifiers are available for the signal conditioning of the analog

Hall-effect sensors and the shunt resistor signal.

A comparator with a programmable threshold is integrated to perform the overcurrent

protection.

The integrated MCU (STM32F031C6 with extended temperature range, suffix 7 version)

allows performing field-oriented control, the 6-step sensorless and other advanced driving

algorithm including the speed control loop. It has the write-protection and read-protection

feature for the embedded Flash memory to protect against unwanted writing and/or reading.

The STSPIN32F0 device also features overtemperature and undervoltage lockout

protections and can be put in the standby mode to reduce the power consumption. The

device provides 16 general-purpose I/O ports (GPIO) with the 5 V tolerant capability, one

12-bit analog-to-digital converter with up to 9 channels performing conversions in a single-

shot or scan modes, 5 synchronizable general-purpose timers and supports an easy to use

debugging serial interface (SWD).

STSPIN32F0 Datasheet(PDF) 4 Page - STMicroelectronics