A5975D datasheet(40/50 Pages) STMICROELECTRONICS

40 / 50 page

Application information

A5975D

40/50

Doc ID 018760 Rev 1

Figure 29.

350 mA LED boost current source

The device is powered from the output voltage so the maximum voltage drop across the

LEDs and resistor sense is 36 V.

The output voltage is given by:

Equation 42

where the ideal duty cycle D for the boost converter is:

Equation 43

As for positive and inverting buck-boost (see Section 8.7 and Section 8.8.) the measured

real duty cycle must be used to calculate the switch current level.

The peak current flowing in the embedded switch is:

Equation 44

while its average current is equal to:

Equation 45

This is due to the fact that the current flowing through the internal power switch is delivered

to the output only during the OFF phase.

OUT

–

-------------

OUT

–

OUT

------------------------------

LOAD

–

---------------

RIPPLE

--------------------

LOAD

–

---------------

⋅

-----------

---------

⋅

LOAD

–

---------------

A5975D Datasheet(PDF) 40 Page - STMicroelectronics

A5975D Datasheet(HTML) 40 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Datasheet Download

Link URL