Electronic Components Datasheet Search
  English  ▼

X  

DS1670S Datasheet(PDF) 17 Page - Dallas Semiconductor

Part # DS1670S
Description  Portable System Controller
PDF  17 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  DALLAS [Dallas Semiconductor]
Direct Link  https://www.maximintegrated.com/en.html
Logo DALLAS - Dallas Semiconductor

DS1670S Datasheet(HTML) 17 Page - Dallas Semiconductor

Back Button DS1670S Datasheet HTML 9Page - Dallas Semiconductor DS1670S Datasheet HTML 10Page - Dallas Semiconductor DS1670S Datasheet HTML 11Page - Dallas Semiconductor DS1670S Datasheet HTML 12Page - Dallas Semiconductor DS1670S Datasheet HTML 13Page - Dallas Semiconductor DS1670S Datasheet HTML 14Page - Dallas Semiconductor DS1670S Datasheet HTML 15Page - Dallas Semiconductor DS1670S Datasheet HTML 16Page - Dallas Semiconductor DS1670S Datasheet HTML 17Page - Dallas Semiconductor  
Zoom Inzoom in Zoom Outzoom out
 17 / 17 page
background image
DS1670
17 of 17
NOTES:
1.
All voltages are referenced to ground.
2.
Logic 1 voltages are specified at VCC =3.3V, VOH =VCC for capacitive loads. Excludes RST pin.
3.
Logic 0 voltages are specified at VCC =3.3V, VOL =GND for capacitive loads.
4.
ICCA is specified with outputs open, CS set to a logic 1, SCLK=500 kHz, oscillator enabled, and D/A
converter enabled.
5.
IADC is specified with CS, VCCO open and I/O, SCLK at logic zero. A/D converter is enabled.
6.
ICCS is specified with CS, VCCO open and I/O, SCLK at logic zero. A/D converter is disabled.
7.
CS has a 40 k
Ω pull-down resistor to ground.
8.
Measured at VIH =2.0V or VIL =0.8V and 10 ns maximum rise and fall time.
9.
Measured at VOH =2.4V or VOL =0.4V.
10. Load capacitance = 50 pF.
11. ICCO =100 mA, VCC > VCCTP.
12. VCCO switchover from VCC to VBAT occurs when VCC drops below the lower of VCCSW and VBAT.
13. Current from VCC input pin to VCCO output pin.
14. Current from VBAT input pin to VCCO output pin.
15. Time base is generated by very accurate crystal oscillator. Accuracy of this time period is based on
the crystal that is used. A typical crystal with a specified load capacitance of 6 pF will provide an
accuracy within ±100 ppm over the 0°C to 70°C temperature range.
16. If the EOSC bit in the Control Register is set to a logic 1, tRPU is equal to 250 ms plus the start-up
time of the crystal oscillator.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com