3

FAR Family (C4 series G type)

s STANDARD FREQUENCY

Note: • For oscillation frequency (in 8 to 16 MHz) other than standard, Fujitsu can also develop applicable part.

• Resonant resistance of the part is specified according to applied frequency as above.

s NOTES ON USE

•

Handle carefully

•

Solder under the following conditions.

5 seconds max. at 230

°C (PCB)

Do not apply extreme heat to the resonator. Recommended preheating is 150

°C for one minute.

•

Avoid extreme fluctuations in temperature during use.

•

There is no specific direction in resonator mounting.

•

Oscillation data should be examined when used in oscillation circuit with micon or other ICs.

•

This is for reflow solder, not for flow solder.

Standard frequency (KHz)

Package size

Resonant resistance

8,000

10,000

G100

Ω max. (Symbol: 5)

11,000

11,059

12,000

16,000

G

75

Ω max. (Symbol: 2)