ATPL230A datasheet(119/122 Pages) ATMEL

119 / 122 page

119

ATPL230A [DATASHEET]

Atmel-43053J-ATPL230A-Datasheet_22-Sep-16

14.

Revision History

In the table that follows, the most recent version of the document appears first.

Doc Rev.

43053

Comments

Change

Request

Ref.

Analog Front-End

Figure 5-3 and Figure 5-5: updated.

Analog Front-End

Section 5.3 ”Zero-crossing detection”: updated.

Peripheral Registers

Added the following registers: “Zero Crossing Configuration” and “Zero Crossing Filter”

PRIME PHY Layer

Added Section 9.3.7.2 ”Zero Crossing Configuration Register” and Section 9.3.7.3 ”Zero Crossing

Filter Register”.

Analog Front-End

Section 5.2 ”ATPLCOUP reference designs” modified.

Format changes according to new templates.

Chapters order redefined.

Deleted Section “Power Considerations”: the information of this section is in Section 3. ”Signal

Description”.

Modified Section 5. ”Analog Front-End” (was “PLC coupling circuitry description”).

Changed “PRIME + Robust” by “PRIME v1.4”.

Electrical Characteristics

Section 10.6 ”Oscillator” updated: modified Figure 10-5, added equation and information after the

figure.

Table 10-7 updated: added the values of CXTAL and CPARA20M . Modified the notes below the table.

Ordering Information

Table 13-1: added new Atmel Ordering Code “ATPL230A-AKU-R”.

MAC Coprocessor

Removed the following registers: “0xFD53, 0xFD54, 0xFD55, 0xFD56, 0xFD5F, 0xFD60, 0xFD61 and

0xFD62”.

Updated Section 8.3.3.3 ”BER HARD Average Error Registers”.

Mechanical Characteristics

Table 11-1,Table 11-2 added.

ATPL230A Datasheet(PDF) 119 Page - ATMEL Corporation