For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

13

HMC877LC3

v03.0614

BROADBAND TIME DELAY & PHASE SHIFTER

SMT, 8 - 23 GHz

Evaluation PCB

The circuit board used in the application should

use RF circuit design techniques. Signal lines

should have 50 Ohm impedance while the package

ground leads and exposed paddle should be con-

nected directly to the ground plane similar to that

shown. A sufficient number of via holes should be

used to connect the top and bottom ground planes.

The evaluation board should be mounted to an

appropriate heat sink. The evaluation circuit board

shown is available from Hittite upon request.

Item

Description

J1 - J2, J5-J6

K Connector

J3-J4

SMA Connector

TP1-TP5

DC Pin

C1-C3

1000 pF Capacitor, 0402 Pkg.

C5-C7

0.1 µF Capacitor, 0402 Pkg.

C8-C9

4.7 µF Capacitor, Tantalum

R2-R3

4.7 kOhm Resistor, 0402 Pkg.

U1

HMC877LC3 Analog Phase Shifter/

Broadband Time Delay

600-00064-00 Evaluation Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350 or Arlon 25 FR

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D