XRT7250 datasheet(429/463 Pages) EXAR

429 / 463 page

XRT7250

áç

DS3/E3 FRAMER IC

REV. 1.1.1

410

Finally, after the LAPD Receiver has received and

processed the newly received LAPD Message frame

(per steps 1 through 4, as described above), it will in-

form the local Microprocessor that a LAPD Message

frame has been received and is ready for user-sys-

tem handling. The LAPD Receiver will inform the Mi-

croprocessor/Microcontroller and the external circuit-

ry by:

• Generating a LAPD Message Frame Received

interrupt to the Microprocessor. The purpose of

this interrupt is to let the Microprocessor know that

the Receive LAPD Message buffer contains a new

PMDL Message that needs to be read and pro-

cessed. When the LAPD Receiver generates this

interrupt, it will set bit 0 (RxLAPD Interrupt Status)

within the Rx E3 LAPD Control Register to “1” as

depicted below.

• Setting Bit 1 (End of Message) within the Rx E3

LAPD Status Register, to “1” as depicted below.

In summary, Figure 201 presents a flow chart depict-

ing how the LAPD Receiver functions.

RXE3 LAPD CONTROL REGISTER (ADDRESS = 0X18)

BIT 7BIT 6BIT 5BIT 4BIT 3BIT 2BIT 1BIT 0

Not Used

DL from NR

RxLAPD

Enable

RxLAPD

Interrupt

Enable

RxLAPD

Interrupt

Status

R/W

RUR

000

001

RXE3 LAPD STATUS REGISTER (ADDRESS = 0X19)

BIT 7BIT 6BIT 5BIT 4BIT 3BIT 2BIT 1BIT 0

Not Used

Rx ABORT

RxLAPDType[1:0]

RxCR

Type

RxFCS

Error

End of

Message

Flag

Present

000

010

XRT7250 Datasheet(PDF) 429 Page - Exar Corporation

XRT7250 Datasheet(HTML) 429 Page - Exar Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL