SQ-PTS

Updated: 2014-01-16

© SignalQuest, LLC.

1999-2014

10 Water St.

Lebanon, NH 03766 USA

Tel: 603.448.6266

Fax 603.619.6330

www.signalquest.com

info@signalquest.com

1

SQ-PTS-HMP

SQ-PTS-VMP

The inclinometer uses 2 factory calibrated accelerometers to

measure and compute angles made between its axes, and the

gravity vector. The trigonometric conversions between

acceleration and angle are made by an onboard processor.

Additional processing filters spurious acceleration and

vibrations to reduce the impact on the resulting output angle.



± 70 º dual axis angle measurement



360 º single axis angle measurement



Reliable on/off tilt switching



Machine control

The tilt sensor module provides a digital level output if

pre-programmed angle thresholds are exceeded. The

two standard digital outputs can be configured at the

factory as two different angle thresholds. In addition 4

additional input/output lines can be factory configured

for a variety of functions on a semi-custom basis,

greatly simplifying designs that require accurate,

reliable angle detection



± 1 º accuracy



0.10 º resolution



Configurable trigger angles



Configurable hysteresis (Schmitt trigger) for

debounce



Configurable reset and trigger delay



Configurable filtering and bandwidth



Low temperature drift



High reliability solid-state MEMS



Digital filtration for stable measurement