5

H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Presses\AP-K2N\TS010-00 AP-K2N Operation

Manual.doc

2 INSTALLING AND TRANSPORTING

THE MACHINE

2.1 Installation

2.2 Transporting

Mount the crimping machine on a solid foundation, place

a rubber mat between the machine and foundation to

reduce vibration and stabilize the machine.

The diagram to the left illustrates the footprint

dimensions of the machine. Secure the machine to the

foundation with four M8 bolts.

The machine should be mounted so that the crimping

dies are at the approximate eye level of a seated

operator.

CAUTION

Ensure that the belt cover of the crimping machine does

not overhang the edge of the mounting surface.

Always mount the handles supplied with the toolbox to

move the machine (as shown in the photograph on the

left).

The machine should always be transported by placing

the lifting handles onto the arms of a fork-lift truck.

DO NOT ATTEMPT TO LIFT MANUALLY.