11

H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Presses\AP-K2N\TS010-00 AP-K2N Operation

Manual.doc

When using the MKF-L Applicator

Step 1

Secure the fabricated steel guard (JST UK-35), to the

applicator using the cap head screw supplied.

Step 2

Select the appropriate side guard (JST UK-95), and

mount onto the side guard support bracket (JST UK-9),

using the countersunk screws supplied.

Step 3

Remove the two upper motor fixing screws and clamp

the side guard support bracket onto the press utilizing

these screws.

Step 4

Adjust the side guard support bracket to achieve the best

relationship between guard and applicator.

Step 5

Tighten the screws and check that the guards are

correctly and securely fitted.

IMPORTANT

If the safety guards become damaged or worn

they must be replaced immediately.

Please contact the JST Technical Department

for replacement guards.