FXPS7115D4 datasheet(68/75 Pages) NXP

68 / 75 page

NXP Semiconductors

FXPS7115D4

Digital absolute pressure sensor, 40 kPa to 115 kPa

17 Mounting recommendations

The package should be mounted with the pressure port pointing away from sources of

debris which might otherwise plug the sensor.

A plugged port exhibits no change in pressure and can be cross checked in the user

software.

Refer to NXP application note AN1902[1] for proper printed circuit board attributes and

recommendations.

18 References

[1]

AN1902 - Assembly guidelines for QFN (quad flat no-lead) and SON (small outline no-lead) packages

https://www.nxp.com/docs/en/application-note/AN1902.pdf

[2]

AEC documents on Automotive Electronics Council Component Technical Committee’s site:

http://www.aecouncil.com/AECDocuments.html

[3]

AN12727 - FXPS7xxxDI4 User method to flash UF2

https://www.nxp.com/webapp/Download?colCode=AN12727&location=null

[4]

I2C-Bus specification and user manual — NXP User Manual (UM) 10204, Rev. 6 - 4 April 2014, 64 pages,

https://www.nxp.com/docs/en/user-guide/UM10204.pdf

19 Revision history

Document ID

Release date

Data sheet status

Change notice

Supercedes

FXPS7115D4 v.6

20220606

Product data sheet

—

FXPS7115D4 v.5

Modifications:

• Global: Performed the following global changes:

– Performed minor grammatical, typographic, and changes for consistency throughout.

• Section 7.3.3.4, Table 7, revised the values in the fourth row from "-25084" to "-25084.8" and from

"746.7" to "746.72".

• Section 7.5.2, Table 12, revised bits 13 to 10 from "0" to "Optional SD resolution" for both

"Response to Sensor Data Request" and "Error Response to Sensor Data Request with Sensor

Data".

• Section 7.5.3.3.2, Table 23, revised as follows:

– Title: revised the table title from "Sensor data request response message format" to "Sensor data

request response message format – 12 bit data length".

– Bits 13 to 10: revised bit values from "0" to "Optional SD resolution" for "Sensor Data".

• Section 7.5.3.3.2, Table 24, added new row for "Optional SD resolution".

• Section 7.5.5, revised as follows:

– Table 31: revised the table title from "Expected initial responses post POR" to "Expected initial

responses after tPOR_DataValid post POR" and added table note.

Table 32: revised the table title from "Expected initial responses during soft reset" to "Expected

initial responses after tPOR_DataValid post soft reset"; and added table note.

• Section 7.7.2.2, Table 39 and Table 40, revised the table note "During POR and soft reset...."

• Section 7.7.2.4, Table 43, revised Bit 6 for the Reset row from "0" to "reserved".

• Section 7.7.4, Table 47, Bit 3 description under "In SPI Mode:", revised "1: No transmissions..." to

"1: No Responses..."

Table 108. Revision history

FXPS7115D4

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6 — 6 June 2022

68 / 75

FXPS7115D4 Datasheet(PDF) 68 Page - NXP Semiconductors

FXPS7115D4 Datasheet(HTML) 68 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

Datasheet Download

Link URL