• Added the Quiescent Current Distribution, Input Bias Current Distribution, Input Offset Voltage Distribution,

Input Offset Voltage Drift Distribution, Input Offset Voltage Drift Distribution, Quiescent Current vs Ambient

Temperature, Input Bias Current vs Ambient Temperature, Input Offset Voltage vs Ambient Temperature,

Turn-On Time to DC InputTurn-Off Time to DC Input, Power-Down Quiescent Current Distribution, and

Power-Down IQ vs Ambient Temperature figures to the Typical Characteristics: VS = 10 V section................ 13

• Updated the titles to the Frequency Response vs Supply Voltage figures in the Typical Characteristics: VS = 3

V to 10 V section...............................................................................................................................................20

• Removed the units from the Quiescent Current Distribution, Input Bias Current Distribution, and Input Offset

Voltage Distribution figures in the Typical Characteristics: VS = 3 V to 10 V section........................................20

• Removed the DGK package from the Quiescent Current vs Ambient Temperature and Input Bias Current vs

Ambient Temperature figures in the Typical Characteristics: VS = 3 V to 10 V section.................................... 20

• Updated the Common-Mode Rejection Ratio vs Frequency, Power Supply Rejection Ratio vs Frequency, and

Open-Loop Gain and Phase vs Frequency figures in the Typical Characteristics: VS = 3 V to 10 V section... 20

• Removed the Quiescent Current Distribution, Input Bias Current Distribution, Input Offset Voltage Distribution,

Input Offset Voltage Drift Distribution, Quiescent Current vs Ambient Temperature, Input Bias Current vs

Ambient Temperature, and Input Offset Voltage vs Ambient Temperature figures from the Typical

Characteristics: VS = 3 V to 10 V section..........................................................................................................20

• Updated the Overview section..........................................................................................................................22

• Updated the Input Stage section...................................................................................................................... 23

• Updated the ESD Protection section................................................................................................................ 24

• Updated the Power-Down Mode section.......................................................................................................... 24

• Removed the Split-Supply Operation (±1.35 V to ±6.3 V), Single-Supply Operation (2.7 V to 12.6 V), Amplifier

Gain Configurations, Transimpedance Amplifier, Design Requirements, Detailed Design Procedure, and

Application Curves sections..............................................................................................................................25

• Updated the Clamp-On Ultrasonic Flow Meter section.....................................................................................28

• Updated the Layout Guidelines section............................................................................................................ 29

• Updated the Thermal Considerations section...................................................................................................30

• Updated the Layout Recommendation figure title in the Layout Example section............................................30

Changes from Revision C (April 2021) to Revision D (July 2021)

Page

• Added Thermal Information for OPA4863PW to the Specifications section....................................................... 8

Changes from Revision B (April 2021) to Revision C (April 2021)

Page

• Removed A from the device name OPAx863 in the Description section............................................................ 1

• Removed A from the device name OPAx863 in the Device Comparison Table section..................................... 4

• Added power-down mode information for DBV package to the datasheet......................................................... 9

Changes from Revision A (June 2020) to Revision B (April 2021)

Page

• Updated the numbering format for tables, figures, and cross-references throughout the document..................1

• Changed the status of the data sheet from: advanced information to: production data..................................... 1

www.ti.com

OPA863, OPA2863, OPA4863

SBOS982I – JUNE 2020 – REVISED DECEMBER 2022

Copyright © 2022 Texas Instruments Incorporated

Submit Document Feedback

3

Product Folder Links: OPA863 OPA2863 OPA4863