MC68340 datasheet(208/441 Pages) FREESCALE

208 / 441 page

MOTOROLA

MC68340 USER’S MANUAL

5- 71

CLKOUT

FREEZE

DSCLK

DSI

SAMPLE

WINDOW

INTERNAL

SYNCHRONIZED

DSCLK

INTERNAL

SYNCHRONIZED

DSI

CLKOUT

DSO

Figure 5-23. Serial Interface Timing Diagram

A user can use the state change on DSO to signal hardware that the next serial transfer

may begin. A timeout of sufficient length to trap error conditions that do not change the

state of DSO should also be incorporated into the design. Hardware interlocks in the CPU

prevent result data from corrupting serial transfers in progress.

5.6.2.7.2 Development System Serial Logic. The development system, as the master of

the serial data link, must supply the serial clock. However, normal and BDM operations

could interact if the clock generator is not properly designed.

Breakpoint requests are made by asserting

BKPT to the low state in either of two ways.

The primary method is to assert

BKPT during a single bus cycle for which an exception is

desired. Another method is to assert

BKPT, then continue to assert it until the CPU32

responds by asserting FREEZE. This method is useful for forcing a transition into BDM

when the bus is not being monitored. Each method requires a slightly different serial logic

design to avoid spurious serial clocks.

Figure 5-24 represents the timing required for asserting

BKPT during a single bus cycle.

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

MC68340 Datasheet(PDF) 208 Page - Freescale Semiconductor, Inc