74HC273; 74HCT273

Octal D-type flip-flop with reset; positive-edge trigger

Rev. 7 — 6 September 2021

Product data sheet

1. General description

The 74HC273; 74HCT273 is an octal positive-edge triggered D-type flip-flop. The device

features clock (CP) and master reset (MR) inputs. The outputs Qn will assume the state of their

corresponding Dn inputs that meet the set-up and hold time requirements on the LOW-to-HIGH

clock (CP) transition. A LOW on MR forces the outputs LOW independently of clock and data

inputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface

inputs to voltages in excess of VCC.

2. Features and benefits

• Wide supply voltage range from 2.0 V to 6.0 V

• CMOS low power dissipation

• High noise immunity

• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

• Complies with JEDEC standards:

• JESD8C (2.7 V to 3.6 V)

• JESD7A (2.0 V to 6.0 V)

• Input levels:

• For 74HC273: CMOS level

• For 74HCT273: TTL level

• Common clock and master reset

• Eight positive edge-triggered D-type flip-flops

• ESD protection:

• HBM JESD22-A114F exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V

• Multiple package options

• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

3. Ordering information

Table 1. Ordering information

Package

Type number

Temperature range Name

Description

Version

74HC273D

74HCT273D

-40 °C to +125 °C

SO20

plastic small outline package; 20 leads; body width 7.5 mm SOT163-1

74HC273PW

74HCT273PW

-40 °C to +125 °C

TSSOP20

plastic thin shrink small outline package; 20 leads;

body width 4.4 mm

SOT360-1

74HC273BQ

74HCT273BQ

-40 °C to +125 °C

DHVQFN20 plastic dual in-line compatible thermal enhanced

very thin quad flat package; no leads; 20 terminals;

body 2.5 × 4.5 × 0.85 mm

SOT764-1