UPD17062 datasheet(200/298 Pages) RENESAS

200 / 298 page

198

µPD17062

15.4

GENERAL-PURPOSE INPUT PORT (P0D)

15.4.1

Configuration

The following explains the configuration of the input port.

(1) P0D (P0D3, P0D2, P0D1, P0D0 pins)

15.4.2

Example of Using Input Port (P0D)

Input data can be read by executing an instruction, such as the SKT instruction, to read the contents of the

port register for each pin.

When a high level signal is input to each pin of the port register, 1 is read. When a low level signal is input

to each pin of the port register, 0 is read.

When a write instruction, such as the MOV instruction, is executed, the port register remains as is.

15.4.3

Notes on Using Input Port (P0D)

P0D is internally pulled down when being used as a general-purpose port.

15.4.4

State of Input Port (P0D) upon Reset

(1) At power-on reset

All I/O ports are set as general-purpose input ports.

(2) At CE reset

All I/O ports are set as general-purpose input ports.

(3) At clock stop

All I/O ports are set as general-purpose input ports.

The RESET signal, output upon clock stop, prevents the current drain from increasing due to noise from

the input buffer, as explained in Section 15.4.1.

P0D is pulled down internally.

(4) During halt state

The previous state is retained.

VDD

RESET

ADC selection signal

Write

instruction

To A/D converter

High on-state resistor

Port register

(1 bit)

Read

instruction

Input latch

UPD17062 Datasheet(PDF) 200 Page - Renesas Technology Corp

UPD17062 Datasheet(HTML) 200 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL