CDx4HC112, CDx4HCT112 Dual J-K Flip-Flop with

Set and Reset with Negative-Edge Trigger

1 Features

• Hysteresis on clock inputs for improved noise

immunity and increased input rise and fall times

• Asynchronous set and reset

• Complementary outputs

• Buffered inputs

• Typical fMAX = 60 MHz at VCC = 5 V, CL = 15 pF, TA

= 25

℃

• Fanout (over temperature range)

– Standard outputs: 10 LSTTL loads

– Bus driver outputs: 15 LSTTL loads

• Wide operating temperature range: -55

℃ to 125℃

• Balanced propagation delay and transition times

• Significant power reduction compared to LSTTL

Logic ICs

• HC types

– 2 V to 6 V operation

– High noise immunity: NIL = 30%, NIH = 30% of

VCC at VCC = 5 V

• HCT types

– 4.5 V to 5.5 V operation

– Direct LSTTL input logic compatibility, VIL = 0.8

V (max), VIH = 2 V (min)

– CMOS input compatibility, II ≤ 1 μA at VOL, VOH

2 Description

The ’HC112 and ’HCT112 utilize silicon-gate CMOS

technology to achieve operating speeds equivalent to

LSTTL parts. They exhibit the low power consumption

of standard CMOS integrated circuits, together with

the ability to drive 10 LSTTL loads.

These flip-flops have independent J, K, PRE, CLR,

and Clock inputs and Q and Q outputs. They

change state on the negative-going transition of

the clock pulse. PRE and CLR are accomplished

asynchronously by low-level inputs.

The HCT logic family is functionally as well as pin

compatible with the standard LS logic family.

Package Information

PART NUMBER

PACKAGE

(1)

BODY SIZE (NOM)

CD54HC112F3A

CDIP (16)

24.38 mm × 6.92 mm

CD74HC112M96

SOIC (16)

9.90 mm × 3.90 mm

CD74HC112E

PDIP (16)

19.31 mm × 6.35 mm

CD74HCT112E

PDIP (16)

19.31 mm × 6.35 mm

CD74HC112NSR

SO (16)

6.20 mm × 5.30 mm

CD74HC112PW

TSSOP (16) 5.00 mm × 4.40 mm

(1)

For all available packages, see the orderable addendum at

the end of the data sheet.

xCLK

C

C

xJ

xK

xCLR

C

C

C

C

xQ

C

C

C

C

xQ

xPRE

Functional Diagram

CD54HC112, CD74HC112, CD54HCT112, CD74HCT112

SCHS141J – MARCH 1998 – REVISED OCTOBER 2022

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION

DATA.