1°C Dual SMBus Sensor with Resistance Error Correction

Datasheet

Revision 1.3 (03-24-06)

4

SMSC EMC1002

DATASHEET

Note: Stresses above those listed could cause damage to the device. This is a stress rating only

and functional operation of the device at any other condition above those indicated in the

operation sections of this specification is not implied. When powering this device from

laboratory or system power supplies, it is important that the Absolute Maximum Ratings not be

exceeded or device failure can result. Some power supplies exhibit voltage spikes on their

outputs when the AC power is switched on or off. In addition, voltage transients on the AC

power line may appear on the DC output. If this possibility exists, it is suggested that a clamp

circuit be used.

Table 1.3 Absolute Maximum Ratings

PARAMETER

RATING

UNIT

-0.3 to 5.0

V

-0.3 to 5.5

V

Voltage on any other pin

V

Operating Temperature Range

-40 to +125

°C

Storage Temperature Range

-55 to +150

°C

Lead Temperature Range

Refer to JEDEC

Spec. J-STD-020

Package Thermal Characteristics for MSOP-8 (TSSOP)

Power Dissipation

TBD

Thermal Resistance (at 0 air flow)

109.6

°C/W

Package Thermal Characteristics for SOIC-8

Power Dissipation

TBD

Thermal Resistance (at 0 air flow)

135.9

°C/W

ESD Rating, All Pins (Human Body Model)

2000

V