AN1620 datasheet(14/50 Pages) ARISTA

Part #	AN1620

Description	Quick Start Guide 7280CR2x-30 Series 1 RU Data Center Switches

PDF	50 Pages

Scroll/Zoom	100%

Manufacturer	ARISTA [Arista Networks, Inc]

Direct Link	https://www.arista.com/en/

Logo

14 / 50 page

3.1.1

Attaching Mounting Brackets to the Chassis (Two-Post)

The following figure displays the front bracket alignment for attaching the switch into a two-post rack.

Figure 2: Bracket Mount Examples for Two-Post Rack Mount

Note: Center mount is recommended, especially for heavier switches.

The following figure displays improper bracket mounts for two-post rack mount.

Figure 3: Improper Bracket Mount Examples for Two-Post Rack Mount

The following procedure attaches the two-post rack mount brackets to the chassis.

1. Align the mounting brackets with the attachment pins to obtain the desired mounting position.

2. Place the bracket flush on the chassis with attachment pins protruding through key-openings.

3. Slide the bracket toward the front flange until the bracket clip locks with an audible click.

The following figure shows the correct bracket attachment for a front mount.

Figure 4: Attaching the Mounting Brackets to the Switch Chassis

1 Step 1

4 Bracket clip (attached)

2 Step 2

5 Bracket clip (aligned)

3 Step 3

AN1620 Datasheet(PDF) 14 Page - Arista Networks, Inc