AN1620 datasheet(18/50 Pages) ARISTA

Part #	AN1620

Description	Quick Start Guide 7280CR2x-30 Series 1 RU Data Center Switches

PDF	50 Pages

Scroll/Zoom	100%

Manufacturer	ARISTA [Arista Networks, Inc]

Direct Link	https://www.arista.com/en/

Logo

18 / 50 page

2. Attach rail to the right rear rack post by inserting rod-end rack plugs into post slots (Figure 11:

Attaching the Rails). The slide assembly must be inside the right posts, relative to the left

rack posts.

If the rack plugs were previously removed, use bolts to attach the rail to the rack.

3. Attach the slide end of the rail to the front post by extending the rail end past the post, then

contracting the rail while guiding the rack plugs into the post (Figure 11: Attaching the Rails).

4. Repeat Step 1 through Step 3 for the left posts. Ensure the rails are on the same horizontal level.

Figure 11: Attaching the Rails

1 Detail A

2 Detail B

3.2.3

Attaching the Switch to the Rack

After the rails are installed, the switch slides on the rails into the rack. Each bracket includes a thumb

screw that attaches the switch to the rail.

1. Lift the switch into the rack and insert the mounting brackets into the slide rails.

Figure 12: Inserting the Switch onto the Rails

AN1620 Datasheet(PDF) 18 Page - Arista Networks, Inc