AD7760 datasheet(5/23 Pages) AD

5 / 23 page

EVAL-AD7760/AD7762EDZ

Rev. Pr B | Page 5 of 23

SOFTWARE INSTRUCTIONS FOR FIRST-TIME USE

INSTALLING THE SOFTWARE

The EVAL-AD7760/AD7762 evaluation board includes self-

installing software on CD ROM, for controlling and evaluating

the performance of the AD7760/AD7762 when it is operated

with the EVAL-CED1Z board. The software is compatible with

Windows® 2000/XP®. If the setup file does not run

automatically, setup.exe can be run from the CD-ROM.

When the CD is inserted into the PC, an installation program

automatically begins. This program installs the evaluation

software. The user interface on the PC

is a dedicated program written especially for the

AD7760/AD7762 when operating with the EVAL-CEDZ board.

The software should be installed before the USB cable is

connected between the EVAL-CEDZ and the PC.

This ensures

that the appropriate USB driver files have been properly

installed before the EVAL-CEDZ is connected to the PC.

When the software is ran for the first time with the EVAL-

CEDZ board connected to the PC, the PC will automatically

find the new device and will identify it. Follow the onscreen

instructions that appear automatically. This installs the drivers

for the CED on the PC. If an error appears on screen when the

software is first opened, then the PC is not recognizing the USB

device. This error is corrected by

Opening the PC’s Device Manager. The Device

Manager is accessed by right clicking on the My

Computer Icon, and selecting Properties. When the

System Properties Window opens, select the Hardware

tab.

Click on Device Manager in the Hardware Tab of the

System Properties window.

Examine the devices listed under the Universal Serial

Bus Controller heading.

If an unknown device is listed, right click on this

option and select, Update Driver.

The New Hardware Wizard will run twice, and under

the ADI Development Tools the following hardware is

listed:

ADI Converter Evaluation and Development Board (WF)

Reboot the PC.

This section describes how the evaluation board, the EVAL-

CEDZ and the software should be set up to begin using the

complete system.

Insert the CD into the appropriate computer drive.

The dialog box shown in Figure 2 appears.

Figure 2.EVAL- AD7760_2EDZ Setup Dialog Box, Initial Software Install

Screen

The destination directory can be chosen using the default

clicking “Next” as shown in Figure 3). If a different location

than the default is preferred, click Browse and select the

desired location. When ready, click Next.

Figure 3. Choose the Destination of the AD776x Software

Accept the license agreement by selecting the correct

option and clicking “Next” as shown in Figure 4.

Figure 4. Accept license agreement

AD7760 Datasheet(PDF) 5 Page - Analog Devices

AD7760 Datasheet(HTML) 5 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Datasheet Download

Link URL