www.ti.com

FEATURES

APPLICATIONS

-VS

1

2

3

4

8

7

6

5

NC

INVERTING INPUT

NONINVERTING INPUT

VH

+VS

OUTPUT

VL

JD PACKAGE

(TOP VIEW)

NC - No internal connection

P0013-01

DESCRIPTION

OPA699M

SGLS289A – MAY 2005 – REVISED MARCH 2006

GAIN +4 STABLE WIDEBAND VOLTAGE LIMITING AMPLIFIER

•

Transimpedance With Fast Overdrive

•

High Linearity Near Limiting

Recovery

•

Fast Recovery from Overdrive: 1 ns

•

Fast Limiting ADC Input Buffers

•

Limiting Voltage Accuracy: ±15 mV

•

–3-dB Bandwidth (G = +6): 260 MHz

•

Stable for G

≥ +4

•

Slew Rate: 1400 V/µs

•

±5-V and 5-V Supply Operation

•

High Gain Version of the OPA698

•

Low Prop Delay Comparator

•

Non-Linear Analog Signal Processing

•

Difference Amplifier

•

IF Limiting Amplifier

•

OPA689M Replacement

The OPA699 is a wideband, voltage feedback op amp that offers bipolar output voltage limiting, and is stable for

gains

≥ +4. Two buffered limiting voltages take control of the output when it attempts to drive beyond these limits.

This new output limiting architecture holds the limiter offset error to ±15 mV. The op amp operates linearly to

within 30 mV of the limits.

The combination of narrow nonlinear range and low limiting offset allows the limiting voltages to be set within 100

mV of the desired linear output range 1-ns recovery from limiting ensures that overdrive signals will be

transparent to the signal channel. Implementing the limiting function at the output, as opposed to the input, gives

the specified limiting accuracy for any gain and allows the OPA699 to be used in all standard op amp

applications.

Non-linear analog signal processing circuits will benefit from the ability of the OPA699 to sharply transition from

linear operation to output limiting. The quick recovery time supports high speed applications.

The OPA699M is available in an industry-standard pinout in a CDIP-8 package. For lower gain applications

requiring output limiting with fast recovery, consider the OPA698M.

ORDERING INFORMATION(1)

TA

PACKAGE

ORDERABLE PART NUMBER

TOP-SIDE MARKING

-55°C to 125°C

CDIP – JD

Tube

OPA699MJD

OPA699MJD

(1)

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at

www.ti.com/sc/package.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Copyright © 2005–2006, Texas Instruments Incorporated

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.