1

2

3

4

8

7

6

5

1A

1B

1Y

GND

VCC

2B

2A

2Y

SN65472-EP

www.ti.com

SLRS061 – SEPTEMBER 2013

DUAL PERIPHERAL DRIVER

Check for Samples: SN65472-EP

1

FEATURES

•

Characterized for Use up to 300 mA

SUPPORTS INDUSTRIAL APPLICATIONS

•

High-Voltage Outputs

•

Controlled Baseline

•

No Output Latch-Up at 55 V

•

One Assembly and Test Site

(After Conducting 300 mA)

•

One Fabrication Site

•

Medium-Speed Switching

•

Available in Extended (–40°C to 125°C)

•

Circuit Flexibility for Varied Applications and

Temperature Ranges (1)

Choice of Logic Function

•

Extended Product Life Cycle

•

TTL-Compatible Diode-Clamped Inputs

•

Extended Product-Change Notification

•

Standard Supply Voltages

•

Product Traceability

D PACKAGE

(TOP VIEW)

(1)

Custom temperature ranges available

DESCRIPTION/ORDERING INFORMATION

The SN65472 dual peripheral driver is functionally interchangeable with series SN75452B and series SN75462

peripheral drivers, but is designed for use in systems that require higher breakdown voltages than either of those

series can provide at the expense of slightly slower switching speeds than series 75452B (limits are the same as

series SN75462). Typical applications include high-speed logic buffers, power drivers, relay drivers, lamp drivers,

MOS drivers, line drivers, and memory drivers.

The SN65472 is a dual peripheral NAND driver (assuming positive logic), with the output of the logic gates

internally connected to the bases of the npn output transistors.

This device is characterized for operation from -40°C to 125°C.

1

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Copyright © 2013, Texas Instruments Incorporated

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.