MAX19713 datasheet(2/37 Pages) MAXIM

2 / 37 page

10-Bit, 45Msps, Full-Duplex

Analog Front-End

_______________________________________________________________________________________

ABSOLUTE MAXIMUM RATINGS

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional

operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to

absolute maximum rating conditions for extended periods may affect device reliability.

VDD to GND, OVDD to OGND ..............................-0.3V to +3.6V

GND to OGND.......................................................-0.3V to +0.3V

IAP, IAN, QAP, QAN, IDP, IDN, QDP,

QDN, DAC1, DAC2, DAC3 to GND .....................-0.3V to VDD

ADC1, ADC2 to GND.................................-0.3V to (VDD + 0.3V)

REFP, REFN, REFIN, COM to GND ...........-0.3V to (VDD + 0.3V)

AD0–AD9, DA0–DA9, SCLK, DIN,

CS/WAKE,

CLK, DOUT to OGND .........................-0.3V to (OVDD + 0.3V)

Continuous Power Dissipation (TA = +70°C)

56-Pin Thin QFN-EP (derate 27.8mW/°C above +70°C) 2.22W

Thermal Resistance

θJA ..................................................36°C/W

Operating Temperature Range ...........................-40°C to +85°C

Junction Temperature ......................................................+150°C

Storage Temperature Range .............................-60°C to +150°C

Lead Temperature (soldering, 10s) .................................+300°C

ELECTRICAL CHARACTERISTICS

(VDD = 3V, OVDD = 1.8V, internal reference (1.024V), CL

≈ 10pF on all digital outputs, fCLK = 45MHz (50% duty cycle), Rx ADC input amplitude

= -0.5dBFS, Tx DAC output amplitude = 0dBFS, CM1 = 0, CM0 = 0, differential Rx ADC input, differential Tx DAC output, CREFP = CREFN =

CCOM = 0.33µF, CL < 5pF on all aux-DAC outputs, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

MAX

UNITS

POWER REQUIREMENTS

Analog Supply Voltage

VDD

2.7

3.0

3.3

Output Supply Voltage

OVDD

1.8

VDD

FD mode: fCLK = 45MHz, fOUT = 2.2MHz on

both DAC channels;

fIN = 5.5MHz on both ADC channels; aux-

DACs ON and at midscale, aux-ADC ON

31.9

SPI2-Tx mode: fCLK = 45MHz, fOUT =

2.2MHz on both DAC channels; Rx ADC

OFF; aux-DACs ON and at midscale, aux-

ADC ON

16.7

SPI1-Rx mode: fCLK = 45MHz, fIN =

5.5MHz on both ADC channels; Tx DAC

OFF (Tx DAC outputs at 0V); aux-DACs

ON and at midscale, aux-ADC ON

27.6

SPI4-Tx mode: fCLK = 45MHz, fOUT =

2.2MHz on both DAC channels; Rx ADC

ON (output tri-stated); aux-DACs ON and

at midscale, aux-ADC ON

31.0

SPI3-Rx mode: fCLK = 45MHz, fIN =

5.5MHz on both channels; Tx DAC ON (Tx

DAC outputs at midscale); aux-DACs ON

and at midscale, aux-ADC ON

30.2

VDD Supply Current

Standby mode: CLK = 0 or OVDD;

aux-DACs ON and at midscale,

aux-ADC ON

3.3

MAX19713 Datasheet(PDF) 2 Page - Maxim Integrated Products

MAX19713 Datasheet(HTML) 2 Page - Maxim Integrated Products

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Datasheet Download

Link URL