8 Application and Implementation

Note

Information in the following applications sections is not part of the TI component specification,

and TI does not warrant its accuracy or completeness. TI’s customers are responsible for

determining suitability of components for their purposes, as well as validating and testing their design

implementation to confirm system functionality.

8.1 Application Information

The AMC0x00D has low analog input voltage range, high accuracy, low temperature drift, and high common-

mode transient immunity. The AMC0x00D is primarily designed for shunt-based current-sensing applications

where accurate current monitoring is required in the presence of high common-mode voltages. The AMC0x00D

is preferred for isolated current sensing in motor drives, frequency inverters, and uninterruptible power-supply

applications.

8.2 Typical Application

The following image shows the AMC0x00D in a typical application. The load current flowing through an external

shunt resistor RSHUNT produces a voltage drop. The AMC0x00D high-side circuitry senses the voltage drop

across the shunt resistor, then digitizes and transfers data across the isolation barrier to the low side. Low-side

circuitry reconstructs the digitized data into an analog signal and provides the signal as a differential voltage on

the output pins.

The differential input, differential output, and high common-mode transient immunity (CMTI) of the AMC0x00D

provide reliable and accurate operation even in high-noise environments.

10

10

10 nF

VDD1

GND1

INP

INN

VDD2

OUTP

OUTN

GND2

RSHUNT

1 uF 100 nF

Floating Gate

Driver Supply

+ DC Link

– DC Link

1 uF

100 nF

Low-side supply

(3.3 V or 5 V)

Load

ADC

1 nF

1 nF

Figure 8-1. Using the AMC0x00D for Current Sensing in a Typical Application

www.ti.com

AMC0200D, AMC0300D

SBASAR7 – SEPTEMBER 2025

Copyright © 2025 Texas Instruments Incorporated

Submit Document Feedback

23

Product Folder Links: AMC0200D AMC0300D